Fitting Instructions
The Cactus is simple and safe to fit yourself, using these easy-to-follow instructions.
We recommend the use of screws rather than nails, 3.5 x16mm screws are ideal. Pilot drilling of fences before fitting is not necessary, however if fitting to a wall, mounting on treated roofing lats would be preferable.
Each Cactus strip has 14 fastening holes, with up to 5 holes to each separable length. When using the product as a whole, we recommend using all screw positions on the outwards-facing edge of the strip, with only one or two required on the inwards-facing edge. If using the product divided into the narrower 15mm strips, we recommend that all of the screw positions are used.
To divide the spiked strip into the 3 narrower lengths, use a Stanley knife, cutting onto a soft surface such as cardboard or grass. Cut away from yourself, and the use of protective gloves is recommended. In order to perfect the final length of your protection system, it may also be necessary to cut the final strip widthways, this is easily achieved using a junior hacksaw or a pair of side cutters.
Due to its oil-based properties, the Cactus is not ideal for glue fixing; however this may be satisfactory for the deterrence only of birds and animals where a less robust fixing is required. For bonding we recommend 'Pink Grip'.
Top tip! For complicated bends of 90 degrees or more, immerse the product in hot water beforehand to provide added bend whilst fitting.
Should you need any assistance with the installation of the Cactus, please do not hesitate to contact us where we will only be too happy to advise. In certain circumstances, particularly for elderly or immobile customers and where there is a Cactus representative in your area, we may be able to arrange a personal visit.
